Hospital Clocks
Ingrams sells a range of clocks with a high degree of accuracy and specifically designed to operate within the strict guidelines required in operating theatres. These clocks meet the strict hygienic demands of operating theatres and include all the very specific features required.
PLF50_6
The flush mounted clocks are available with 50 mm high digits, 4-digit (HH:MM) and 6-digit (HH:MM:SS) versions. Designed to meet operating theatres standards - stainless steel casing and glass face. The clocks can be additionally equipped with a flush-mounted stainless steel remote control necessary to operate the stopwatch function. They also offer the option of an alternating time and date display. The clocks are managed via the web panel or via dedicated RGB Clock Set software.
- Super bright wide-angle selected LEDs
- Legibility even in direct sunlight (automatic brightness control)
- Module construction, easy installation and maintenance
- Additional functions: stopwatch,
- Clocks are operational via LAN interface, optionally with wired remote
- Possible synchronization with NTP server
- Optional accessories: GPS receiver, temperature probe,
-As standard clocks are wall flush mounted
- Stainless steel case with glass face (can be cleaned with industrial cleaning supplies)
PLF50_4
The flush mounted clocks are available with 50 mm high digits, 4-digit (HH:MM) and 6-digit (HH:MM:SS) versions. Designed to meet operating theatres standards - stainless steel casing and glass face. The clocks can be additionally equipped with a flush-mounted stainless steel remote control necessary to operate the stopwatch function. They also offer the option of an alternating time and date display. The clocks are managed via the web panel or via dedicated RGB Clock Set software.
- Super bright wide-angle selected LEDs
- Legibility even in direct sunlight (automatic brightness control)
- Module construction, easy installation and maintenance
- Additional functions: stopwatch,
- Clocks are operational via LAN interface, optionally with wired remote
- Possible synchronization with NTP server
- Optional accessories: GPS receiver, temperature probe,
-As standard clocks are wall flush mounted
- Stainless steel case with glass face (can be cleaned with industrial cleaning supplies)
WS OP CLOCK, DIGITAL
- Stainless steel housing.
- Polycarbonate front.
- Red LEDs.
- Built-in dimmer.
General
Combined digital and analogue indoor clock designed for use in operating rooms. The clock has a polished stainless-steel housing and polycarbonate front.
It has an automatic built-in dimmer.
The display can be programmed to switch between time, date and temperature mode. (To display air temperature, a sensor is required – purchased separately.)
The digital clock can also be used as a chronometer (option).
Synchronization
The clock is also available as Impulse, Timecode, or as Stand-alone.
Installation
Single-sided for surface or recessed mounting.
Power failure
The LEDs are extinguished during power failures. An internal clock keeps time for approx 48 hours. When power is restored, the LEDs light up displaying the correct time.
Character height
50/35 mm
WS OP CLOCK COMBI CHRONO
- Stainless steel housing.
- Matt white dial face.
- Black hour and minute hands, red second hand.
- Polycarbonate front.
- Red LEDs.
- Built-in dimmer.
General
Combined digital and analogue indoor clock designed for use in operating rooms. The clock has a polished stainless-steel housing and polycarbonate front.
The digital clock has an automatic built-in dimmer.
Display mode can be programmed to switch between time, date and temperature. (To display air temperature, a sensor is required – purchased separately.)
The digital clock can also be used as a chronometer (option).
Synchronization
The clock is also available as Impulse, Timecode, NTP or as Stand-alone.
Installation
Single-sided for surface or recessed mounting.
Power failure
The LEDs are extinguished during power failures. An internal clock keeps time for approx 48 hours. When power is restored, the LEDs light up displaying the correct time.
Character height
50/35 mm
WS OP CLOCK COMBI CHRONO DIGITAL
- Stainless steel housing.
- Polycarbonate front.
- Red LEDs.
- Built-in dimmer.
General
Digital indoor clock designed for use in operating rooms. The clock has a polished stainless-steel housing and polycarbonate front.
It has an automatic built-in dimmer.
The upper display can be programmed to switch between time, date and temperature modes. (To display air temperature, a sensor is required – purchased separately.)
The lower display can also be used as a chronometer (option).
Synchronization
The clock is also available as Impulse, Timecode, NTP or as Stand-alone.
Installation
Single-sided for surface or recessed mounting.
Power failure
The LEDs are extinguished during power failures. An internal clock keeps time for approx 48 hours. When power is restored, the LEDs light up displaying the correct time.
Character height
50/35 mm
